Whats my name and purpose?

[drmini in aust]

Still is available - Karcraft stock them along with most parts suppliers

Make sure you put an O ring under them, or they will leak fluid out....
I run an old one on my Mk1 S brake M/C, works great.

[Wombat]

Make sure you put an O ring under them, or they will leak fluid out....
I run an old one on my Mk1 S brake M/C, works great.

They come with an 'O' ring but no cap  - as I found when I bought one - Oh and don't over tighten or the O ring squeezes out 

[Andy]

Shouldnt the original cap fit?

[drmini in aust]

Shouldnt the original cap fit?

Yep the plastic one sure does, no problem.
re the O-ring, my s/h extension had none, so I went through an O-ring kit until I found the perfect size.

[Marty]

OK BARCADI TIME IS NIGH and her is another who AM I AND WHATS MY FUNCTION?>>>?>>

PICTURE AAAA




PICTURE BBBBBB




THe first tp identify the correct part and purpose gets to pour my nexty bacrdi because my feet are feeling tingly...

[Marty]

shoudl also ask whats my worth and flog these parts off on ebay for drinking money!!!!

[Wombat]

1 = clutch plate

2 = 3 into 1 extractors

[Tim]

are 3 into 1 extractors made normally like that with a mass of welds at one end??

Yes, but usually not quite that much.

As for what they are worth on ebay? They'd cost more to post than their value. Secondhand clutch plates are pretty well worthless, and I don't think there's much life left in the extractors.

Tim

[drmini in aust]

are 3 into 1 extractors made normally like that with a mass of welds at one end??

There are 3 ways to make them-
1. like in the pic,
2. like in the pic but pipe joint twisted 90° (Perry)
3. with the 1-4 pipe join a few inches above where the 2&3 pipe does (Maniflow).

They all work, GR says with a big pipe on the bottom they will handle up to 120HP.